Cedar Hot Tubs Building Guide

cedar hot tubs

If you’re interested in how to build cedar hot tubs, you’ve come to the right place. Here, we’ll answer your questions about cedar hot tubs, from how they work to what kind of wood is best for this type of hot tub. Also, we’ll tell you how long water can stay in a cedar hot tub. We’ll also tell you about cedar’s resistance to decay.

What is a cedar hot tub?

cedar hot tubs
Source: cedar hot tubs

A cedar hot tub is made of tongue and groove boards held together by steel bands. These are typically deeper than acrylic tubs. However, cedar hot tubs do require some assembly after delivery. As with any wooden furniture, they require careful assembly. 

While cedar tubs may require a small amount of work during the initial assembly, they can be built in about a day if you follow the proper instructions. Although cedar hot tubs are often cheaper than acrylic tubs, it’s always a good idea to follow the manufacturer’s instructions before starting any construction.

Another important aspect of caring for a cedar hot tub is cleanliness. The water should be kept clean at all times, as body oils tend to float to the top of the water. These oils can eventually stain the wood below the water level. 

Fortunately, cleaning products are available to help you maintain the water line. Cedar hot tubs should be cleaned as often as possible to avoid the appearance of algae, so keep this in mind when choosing a cedar hot tub.

How do you build cedar hot tubs?

For anyone interested in DIY projects, you might be wondering how to build a cedar hot tub. To begin the project, you will need staves. You can purchase these in lumberyards or online. Then, measure the desired length and width of your tub staves and make a dado joint between each stave. 

The dado joint will decrease the inside circumference of the hot tub. Once all the pieces are cut, you’re ready to begin building. Next, you’ll need to find staves that are 3 1/2 inches wide by three feet long.

To construct a cedar hot tub, you’ll need clear cedar lumber. This is a relatively expensive choice, so you may want to check around at different lumber yards to find the best deal. 

Be sure to look for boards that are free of knots, as these weaken the wood. Buying cedar lumber without knots is a great way to save money and build a quality hot tub.

What is the best wood for a hot tub?

Source: cedar hot tubs

A classic cedarwood hot tub is deep and round. This is a style that many people dream of building. In fact, one YouTuber built a cedarwood hot tub for three people on a remote island, and was pretty satisfied with the results. 

You can follow his steps and build your own classic cedarwood hot tub. Read on to learn more about the process. There are many tips to help you build a cedarwood hot tub, including choosing the correct wood.

When building a hot tub, the hardest part is sourcing clear cedar lumber. Don’t use boards that have knots, as these are weak areas in the wood and can lead to massive leaks. Because clear cedar is considered to be #1 grade, it is expensive and difficult to find in most lumber yards. 

Fortunately, there are some ways to source clear cedar. First, you can search online for cedar lumber. Many lumber yards online will ship cedar lumber.

How long can you leave water in a cedar hot tub?

Before using your cedar hot tub, you must fill it with water. Once you have added four inches of water, leave it overnight. The water will swell and make the walls and floor dense. The next day, add another four inches. 

Continue this process until the hot tub reaches 80%. It will help protect the cedar from water damage. Afterward, you should check it monthly to see if there are any signs of damage.

You can add hydrogen peroxide to your hot tub water. But remember to only add a small amount at a time. This will ensure that the chemicals have the maximum effect. It will also reduce the risk of chemical reaction. 

It will also let you evaluate its effectiveness. After all, you don’t want to use the hot tub too soon after adding the chemical. The chemicals should dissolve in the water.

Cedar hot tubs are a great investment, but proper care is key to getting the most enjoyment out of it. The wood used to construct these spas is naturally antibacterial and anti-decay, which means it will last a very long time. 

Cedar also repels moisture and insects, making it low maintenance. However, you should not overuse the chemicals in your cedar hot tub. Besides lowering the quality of the overall experience, they can also change the appearance of the water.

How often do you change the water in a cedar hot tub?

Source: cedar hot tubs

How often do you change the water in o ur Cedar hot tub? Keeping your hot tub clean is the number one priority. Regularly change the water in your Cedar hot tub is crucial for optimal enjoyment. 

However, the water in your cedar tub can become unsanitary over time. To keep it clean, you can purchase hot tub test strips, which are cheap and easily available at pool supply stores. These tests will help you determine if your hot tub water requires sanitizer or a chemical change. If your cedar hot tub is equipped with an ionizer, you may only need to test the copper level.

Every three to six months, you should drain and scrub your cedar hot tub with a 3M scotch bright pad. You should also clean the filter system and check for any interior or exterior damage. Preventing any problem early will save you from a lot of headaches. And while you’re at it, you can also consider using chemical-free cleaners if you don’t want to use chemicals.

How do you maintain a cedar hot tub?

Taking care of your cedar hot tub does not require a lot of time or effort. Three main areas of concern are the water, cleanliness, and interior of the tub. Here are some simple tips for maintaining your cedar hot tub. You should drain and clean it every three to six months. During the process, check for any interior or exterior damage. If you find any, you can make repairs before they become expensive and cause more inconvenience.

Cedar wood is naturally resistant to mold and mildew, and the oils in it make it attractive and durable. 

However, constant exposure to the sun can dry it out and erode its color. To get the cedar color back, you may need to refinish the wood. Regular maintenance will keep your cedar hot tub looking new for a longer time. It is important to know how to maintain a cedar hot tub.

When can you use cedar hot tub?

Source: cedar hot tubs

When can you use a cedar hot tub? The answer to this question is very dependent on your personal preferences. However, it is generally recommended to check your cedar hot tub monthly to avoid damage. 

This is because the wood can be sensitive to harsh chemicals and can deteriorate if you don’t maintain it properly. Here are some of the most important tips to maintain the cedar of your hot tub. Using a UV-purification system will help your cedar hot tub stay clean longer.

The wood used to build a cedar hot tub is 1-3/4″ thick. A thicker wood is less likely to warp or dry rot, extending its lifespan. Unlike plastic hot tubs, a wooden hot tub won’t crack, bubble, fade or peel. 

Cleaning a wooden hot tub requires draining it thoroughly. A wood-fired hot tub is also safer to use than one that uses chemical additives.

How are cedar hot tubs heated?

[amazon box=B07MVKH7CZ]

The heat produced by a cedar hot tub is provided by Western Red Cedar. The wood contains a high insulating capacity, resulting in a remarkably warm bath. The cover is 99 mm thick and acts like a thermos flask. 

During a sanitization cycle every day, enough heat is provided to keep the water comfortable. Cedar hot tubs are the perfect choice for the environment-conscious home or for those who like to live off the grid.

The wood of cedar hot tubs contains tannins, which leach into the water, turning it a reddish brown. This process may last between two and three months, depending on the content of the wood. These tannins are not harmful, and they are actually a sign of how much natural preservative is in the wood. 

Nevertheless, the tannins can discolor bathing suits. Standard spa chemicals can be used to control this discoloration.

Leave a Reply

Your email address will not be published. Required fields are marked *