Imagine that you’re all set to jump in your hot tub for a relaxing soak, but as soon as you get in, you realize the jets aren’t working. Not only is this frustrating, it can also be damaging to your hot tub. That’s why it’s important to know how to fix hot tub jets blowing out.
If you’re lucky, the problem is simply a clog that can be cleared with a little bit of elbow grease. But if the jets are blowing out for no apparent reason, it might be time for some repairs. In this article, we’ll show you how to fix hot tub jets that blow out. And we’ll teach you a few ways to prevent it from happening in the first place.
What Are Hot Tub Jets?
Hot tub jets are a necessary component of any hot tub. They provide the massage and hydrotherapy that many people enjoy while soaking. However, sometimes these jets can stop working correctly, which can be a real bummer.
There are a few things you can do to try and fix hot tub jets that blow out. The first is to check the filters. If they’re clogged, it can cause the jets to malfunction. You can also try cleaning out the jet housing orifice. If that doesn’t work, you might need to replace the jet housing altogether.
How to fix hot tub jets blowing out
Hot tub jets are one of the most common causes of hot tub problems. The jets can become clogged with debris or debris can get into the motor, causing it to malfunction. You may also experience low water pressure or rushing water when using your hot tub. In this section, we’ll discuss how to fix a blowout and prevent them from happening again in the future!
Turn the hot tub off
Turn off the breaker. This will stop any power source from being able to energize your hot tub heater, including the electrical system and water pump.
Turn off the hot tub’s power switch. If you have a timer or automatic shutdown feature on your heater, it should also be turned off at this time so that there is no chance of an electric shock when turning back on later in this process, which may take some time (depending on how long it has been since last used).
Check the pump and impeller
When your hot tub is blowing out, you may have an issue with the pump and impeller. If your hot tub is still under warranty, contact the manufacturer for repair or replacement.
If you have purchased an older tub from a dealer or yard sale and it’s been sitting around for years with no use, this could be why you’re experiencing problems with your jets. The first thing to do in this situation is check the pump and impeller by removing them from their mounts and inspecting them carefully for damage or debris buildup inside or around them.
A full inspection should include checking each one thoroughly with a flashlight so as not to miss any signs of wear or tear over time (such as cracks). If there are any problems found during this process then they need immediate attention before they become serious issues down road; otherwise just clean them off good!
Check the motor
It’s a very important step on how to fix hot tub jets blowing out. To check the motor, you’ll want to disassemble it and look for any problems. You should also check the wires and connections inside of it, as well as any corrosion or water damage on its surface. If your hot tub doesn’t have a removable motor (like most units), then you’ll need to remove it from the unit so that you can inspect all parts closely. If there are no loose wires or broken pieces in your hot tub’s motor, then continue with other method below!
Check the lid
The lid is a vital part of your hot tub, but it can also be damaged by water and debris if not properly cared for. If you find any cracks or holes in your lid, contact an expert to repair them before they become major problems that will cost you more than just a few dollars’ worth of repairs.
Inspect the gaskets and seals around each joint, as well as their pressure points (where they meet). A leaky gasket could mean that you need new ones; likewise, if there are any rips or tears in these areas, then replacement is necessary as well.
Look at all surfaces inside and outside of your hot tub: Have they been scraped up by rocks? Are there marks left behind from previous use (or even just weathering)? These things should be taken care of before using again so no one gets hurt during use!
Replace or clean your filter cartridge.
The most common cause of hot tub jets blowing out is a dirty filter cartridge. Filter cartridges are usually located in the pump basket, but there may be other places as well. If you have checked your filter and it’s still damaged, you’ll probably want to replace it.
If your filter has holes or tears in it (and this can happen if you’ve had an accident), then you’ll want to replace that too. But only if there isn’t something else wrong with your hot tub jet system first!
Inspect for damage or leaks.
If the hot tub is leaking, it’s time to replace it. You can check for leaks by filling up your hot tub with water and watching where it goes. If any pooling or dripping occurs, you’ll need to replace your heater or other parts of the spa as soon as possible.
If there are cracks in your hot tub frame or walls that aren’t covered by warranty (or if you’ve had problems with them before), then you should do some investigating about replacing those too! You should keep this in mind to know how to fix hot tub jets blowing out.
Close all jets and turn on the hot tub.
The first step to fixing a hot tub that blows out is to turn on the hot tub. If you don’t do this, then your efforts will be wasted. Next, check for leaks around the unit and any damage to it. If there are no problems with the unit itself but you do find evidence of leaking or damage, then you may want to replace it before trying again with your new method.
Once everything works properly again (you might have had some issues), check whether or not your pump is working correctly by turning it on and hearing if any bubbles come from under its cover when water flows through it into their intake hose at full speed (this could mean that something is wrong with either part).
If nothing happens after turning off/on repeatedly until satisfied with results then go ahead and ask questions about what happened here as well since these things can happen unexpectedly sometimes so having someone else look into them may help solve whatever problem caused ours too!
Identifying Causes of Blown Out Jet Streams
There are a few things that could be causing your jets to blow out. It’s possible that there’s too much debris caught in the jets, which is preventing them from rotating properly. It’s also possible that the water pressure is too high, or that there’s something blocking the pipes.
If you’re able to, it might be helpful to take a look at the jets and see if there’s anything caught in them. However, if there is, use a pipe cleaner or a vacuum cleaner with the hose attachment to remove it. If the water pressure is too high, try turning it down a notch or two. And if you think something is blocking the pipes, try using a plunger to dislodge it.
Troubleshooting Other Common Issues With Hot Tub Jets Blowing Out
Now that you know how to fix hot tub jets blowing out, you should also know how to troubleshoot other issues. If your jets are blowing out, you’re likely experiencing one of two common issues: either the jet is clogged or there’s not enough water pressure, or even hot tub her button not working.
To troubleshoot a clogged jet, you’ll need to remove the spa cover and locate the jet in question. Use a long, thin object like a chopstick or a metal hanger to clear out any debris that may be blocking the flow of water. If that doesn’t work, you can also try using a vacuum cleaner to suck out the clog.
If there’s not enough water pressure, you’ll need to adjust the water level in your hot tub. The level should be high enough so that the jets are completely submerged when the jets are turned on. You can adjust the level by turning the valves at either the top or bottom of your hot tub.
Tips and Tricks for Preventing Jet Stream Issues
The good news is that there are a few easy steps you can take to prevent jet stream issues before they happen. First and foremost, you should regularly check that all the jets are clean and free of debris or blockages. It’s also important to check that the water is circulating properly. If you find any issues, try cleaning the jet a second time, and if that doesn’t work, contact a hot tub specialist for help.
Second, make sure the filter is regularly cleaned and replaced as necessary. When the filter gets clogged up with dirt and debris, it makes it harder for the jets to do their job correctly. Finally, if your water isn’t balanced correctly. It means it’s too alkaline or acidic. The jets can become blocked or blocked up with air bubbles. Check your pH levels on a regular basis and make adjustments as needed to ensure that everything is running smoothly.
With these tips, you can easily be familiar with how to fix hot tub jets blowing out. Remember that water is a very powerful force and should never be exposed to heat or flame. Make sure all of the pieces are dry or clean before putting them back into place. That’s because this could cause damage to the motor or impeller.
You should also make sure that nothing is blocking anything before turning on the water again; if there’s something preventing air from coming in contact with water then air could potentially flood out through holes in pipes or cracks around fittings which. It can lead to flooding or other problems down the road!